LTC - Liquid Tank Conditioners

LTC-2ABSSF Liquid Tank Conditioner

» View LTC Brochure /PDF/

» View LTC Specs /PDF/

Designed to disinfect air in the headspace of liquid storage tanks, American Air & Water's
Liquid Tank Conditioning UV / filtration systems are well suited for water, liquid sugar and syrup applications where warm, moist conditions encourage bacteria, yeast and mold growth. Through UV disinfection and filtration these UV systems can provide air 99.9% free of microorganisms - bacteria, yeast, mold and mold spores. The LTC UV systems are mounted outside the tank, so there is no concern about broken lamps or electrical components being introduced into the stored product. An extensive array of options allows us to provide equipment that fits each customer's unique application, as well as stringent UV sterilization / disinfection and filtration requirements. If our standard UV liquid tank conditioners and the available options do not fulfill your needs, we will be happy to design a unit to your specifications.

Liquid Tank Conditioners

Liquid Tank Conditioners are constructed of high grade stainless steel to mount on top of liquid storage tanks (as shown) and provide unsurpassed filtration and UV disinfection. Using two 10-micron electrostatic pre-filters, one 0.3-micron Absolute HEPA filter, a 140CFM blower motor and two UVC germicidal lamps, these conditioners will filter and sterilize air in the tank  headspace. Positive pressure created by the blower forces clean, disinfected air into the tank at all times. The LTC units can handle drop-out rates of up to 200GPM and must be mounted on top of the tank.

LTC AB Series Standard Features

 - LTC-2AB SSF - two 36" Slimline germicidal UV lamps GML005
 - Two electrostatic 10-micron pre-filters FLT025 (10" x 10" x 1")
 - One 0.3-micron Absolute HEPA filter FLT035 (10" x 10" x 6")
 - 140 CFM blower motor
 - Stainless steel construction
 - Designed to mount on top of tank
 - 3" diameter PVC IPS threaded female coupling to tank
 - Electronic ballast capable of operating from 110V to 277V at 50/60Hz

A Liquid Tank Vent LTX filtartion system should be installed on the tank exhaust to prevent contaminated air from entering if rapid product drop-out creates reverse suction through the exhaust. The AB Series LTX Vent system consists of two 10-micron electrostatic (FLT025) pre-filters and one 0.3 micron Absolute HEPA (FLT035) filter housed in a high grade stainless steel enclosure.

LTC P Series

Designed for applications that don't require the high efficiency filtration of the AB Series, P Series conditioners and vents do not include the 0.3-micron Absolute HEPA filter and one of the electrostatic pre-filters featured in the AB Series.

LTC-2P SSF - Liquid Tank Conditioner - single electrostatic filter, 140 CFM blower, two GML005 UV lamps
LTX10P SSF - Vent - single electrostatic filter (FLT025)

Liquid Tank Conditioners ^