UV Air Purifiers AP-600

Discontinued :: AP-600 Portable Germicidal UV Air Purifiers :: Discontinued

AP-600 UV Air Purifier shown. The AP-600 portable UV air purifiers utilize two high intensity UV lamps and cover up to 300 square feet. The UV light is enclosed and directed so the room can be occupied while the air purifiers are working. UV Air Purifiers Features: - Sterilize air in rooms up to 300 sq. ft. - Electrostatic Air Filter - 2 high intensity UV lamps - Light weight – 10 lbs - Compact unit – 10” x 10” x 10” - Variable speed fan 10 –100 cfm - Electrical - 120V/60Hz The portable UV air purifiers provide clean environment by reducing airborne germs - bacteria, viruses, mold and spores. Annual replacement of the UV lamps is strongly recommended. The effective life of the UV lamps is 10,000 hours. After that the UV effectiveness starts to deteriorate. Air filter should be cleaned regularly and replaced as needed, at least every 2 years. Electrostatic air filter should be cleaned monthly – use running water to rinse. UV Air Purifiers Replacement Parts:
Description	Part #
Fan Cord	FAN055
Air Filter	FLT025
Fuse	FUS5AMP
Handle	MSC045
UV Lamp Holder	LDH110
On/Off Switch	SWT TOGGLE
Power Cord	GRD005
Rear Fan Guard	FAN020
Rear Fan	FAN75
Rubber Feet	MSC065
Transformer	TXG231
Germicidal UV Lamps	GML370 (2 lamps needed)
Variable Blower Switch	FANMTRCTRL

The UV air purifiers are completely assembled, with UV lamps packaged separately to prevent breakage. Do not plug into outlet until lamps are installed. To install lamps:

1. Unlatch three base connection locks to open unit
2. Lift with handle and turn over to install lamps
3. Remove UV lamps from packaging material and clean with cloth and alcohol. Do not touch glass portion of the lamps with bare hands as this will reduce UV output
4. Insert each lamp base into white sockets on side of unit. Hold lamp in place and secure matching by-pins
5. Check wiring connections to ensure they are not loosened by shipping
6. Reinstall the cover. Fasten three latches
7. Plug unit into appropriate outlet
8. ON/OFF switch is located on front of unit. ON should power red light to display UV lamp is on
9. Control knob is for variable speed fan - position to desired speed

For best results the UV lamps should be replaced annually.

Portable UV Air Purifiers AP-600