UV PRODUCTS
|
 |
|
|
Platinum SPV Commercial/Residential UV Water Purifiers |
The Sterilight Platinum SPV UV systems carry NSF/ANSI Standard 55,
Class A certification. A total of five models are available with
flow rates from 2.5 to 14.6GPM. Whether you are looking for a
point-of-use disinfection UV system or a high-flow point-of-entry
system, Sterilight's SPV Platinum UV systems have you covered.
 These
NSF validated systems deliver a 40 mJ/cm²
UV dose at the alarm set-point as dictated by NSF/ANSI Standard 55
test protocol. Systems offer a 4-log reduction (99.99%) of bacteria,
virus and protozoan cysts (Giardia lamblia and Cryptosporidium)
Applications include private wells,
camp grounds, hotels, bottlers, aquaculture, hospitals, food,
cottages, restaurants, breweries, water systems, laboratories,
marine, pharmaceutical, dairies and many other applications.
NSF 55 Class A Certified UV water disinfection systems
|
|
SPV UV Water Systems Technical Data |
| UV Water System |
Description |
SPV-200
 |
2½GPM, axial flow 316L reactor, electropolished and
passivated, 0.5” MNPT inlet/outlet ports, Platinum™ ICE
controller with Flow-Pace™ UV sensor and Safety-Loc™
connector, 90-250V/50-60Hz, includes 2½GPM dynamic 316L
flow restrictor and mounting clamps.
S200RL-HO High-output UV replacement lamp 11.8“ [30cm]
QS-200 Quartz sleeve for SPV-2.5 [23.2 cm (9.1“), domed] |
SPV-410
|
5.8GPM, axial flow 316L reactor, electropolished
and passivated, Combo ¾” FNPT/1” MNPT inlet/outlet ports,
Platinum™ ICE controller with Flow-Pace™ UV sensor and
Safety-Loc™ connector, 90-265V/50-60Hz, includes 5.8GPM
dynamic 316L flow restrictor and mounting clamps.
S410RL-HO High-output UV replacement lamp [20" (51cm)]
QS-410 Quartz sleeve for SPV-3.5 [54.2 cm (21.3“), domed] |
SPV-600
|
8.8GPM, axial flow 316L reactor, electropolished
and passivated, Combo ¾” FNPT/1” MNPT inlet/outlet ports,
Platinum™ ICE controller with Flow-Pace™ UV sensor and
Safety-Loc™ connector, 90-265V/50-60Hz, includes 8.8GPM
dynamic 316L flow restrictor and mounting clamps.
S600RL-HO High-output UV replacement lamp 27.6“ [70cm]
QS-600 Quartz sleeve for SPV-6 [73.2 cm (28.8“), domed] |
SPV-740
|
11GPM, axial flow 316L reactor, electropolished and
passivated, , Combo ¾” FNPT/1” MNPT inlet/outlet ports,
Platinum™ ICE controller with Flow-Pace™ UV sensor and
Safety-Loc™ connector, 90-265V/50-60Hz, includes 11GPM
dynamic 316L flow restrictor and mounting clamps.
S740RL-HO High-output UV replacement lamp 33“ [84cm]
QS-740 Quartz sleeve for SPV-8 [87.2 cm (34.3“), domed] |
SPV-950
|
14.6GPM, axial flow 316L reactor, electropolished
and passivated, , Combo ¾” FNPT/1” MNPT inlet/outlet
ports, Platinum™ ICE controller with Flow-Pace™ UV sensor
and Safety-Loc™ connector, 90-265V/50-60Hz, includes
14.6GPM dynamic 316L flow restrictor and mounting clamps.
S950RL-HO High-output UV replacement lamp 41.3“ [105cm]
QS -950 Quartz sleeve for SPV-12 [108.2 cm (42.6“), domed] |
Trojan UV Max Pro20
|
20GPM UV System NSF Certified for 40mJ/cm² UV dose,
316L Stainless steel
UV Lamp - 602855
Quartz Sleeve - 602975
Controller - 650709-006
Sensor - 650580 |
Trojan UV Max Pro30
|
30GPM UV System NSF Certified for 40mJ/cm² UV dose,
316L Stainless steel
UV Lamp - 602856
Quartz Sleeve - 602976
Controller - 650709-009
Sensor - 650580 |
|
SPC-ICE-HO |
Platinum™ ICE controller for all SPV systems,
90-265V/50-60Hz |
|
The NSF
55 Class A certification requires the system to deliver
a 40,000µJ/cm² (40mJ/cm²) UV dose at the certified flow rate at 70% UVT (Ultraviolet Transmittance). The certified flow rates
are determined by NSF through microbiological testing. |
|
 Contact
American Air & Water for pricing and additional information
IMPORTANT: Dispose of used UV lamps
as hazardous waste in accordance with local, state and federal regulations or
the lamps should be recycled. Please dispose of the used UV lamps properly or
send them to American Air & Water for recycling.
|
