LTC - Liquid Tank Conditioners

Designed to disinfect air in the headspace of liquid storage tanks, American Air & Water's
Liquid Tank Conditioning UV / filtration systems are well suited for water, liquid sugar and syrup applications where warm, moist conditions encourage bacteria, yeast and mold growth. Through UV disinfection and filtration these UV systems can provide air 99.97% free of microorganisms - bacteria, yeast, mold and mold spores. The LTC UV systems are mounted outside the tank, so there is concern about broken lamps or electrical components being introduced into the stored product. An extensive array of options allows us to provide equipment that fits each customer's unique application, as well as stringent UV sterilization / disinfection and filtration requirements. If our standard UV liquid tank conditioners and the available options do not fulfill your needs, we will be happy to design a unit to your specifications.

Liquid Tank Conditioners For Tanks Under 20,000 Gallons

AB Series Liquid Tank Conditioners mount on top of liquid storage tanks (as shown) and provide unsurpassed filtration and UV sterilization. Using 304 stainless steel, two 10-micron electrostatic pre-filters, one 0.3-micron Absolute HEPA filter, a 140CFM blower motor and one or two UVC germicidal lamps (based on tank capacity), these conditioners will filter and sterilize air in the tank  headspace. Positive pressure created by the blower forces clean, disinfected air into the tank at all times. Tanks holding 10,000 US gallons (37,850 liters/37.85m³) and more require two lamp units – LTC-2AB SSF.

LTC AB Series Standard Features

 - LTC-1AB SSF - for tanks up to 10,000 gallon - one 36" Slimline germicidal UV lamp GML005
 - LTC-2AB SSF - for 11,000 to 20,000 gallon tanks - two 36" Slimline germicidal UV lamps GML005
 - Two electrostatic 10-micron pre-filters FLT025 (10" x 10" x 1")
 - One 0.3-micron Absolute HEPA filter FLT035 (10" x 10" x 6")
 - 140 CFM blower motor
 - 304 stainless steel construction
 - Designed to mount on top of tank
 - 3" diameter PVC IPS threaded female coupling to tank
 - Electronic ballast capable of operating from 110V to 277V at 50/60Hz

A Liquid Tank Vent (LTX) unit should be installed on the tank exhaust to prevent contaminated air from entering if rapid product dropout creates reverse suction through the exhaust. The AB Series LTX Vent unit consists of two 10-micron electrostatic (FLT025) pre-filters and one 0.3 micron Absolute HEPA (FLT035) filter housed in a 304 stainless steel enclosure.

LTC P Series

Designed for applications that don't require the high efficiency filtration of the AB Series, P Series conditioners and vents do not include the 0.3-micron Absolute HEPA filter and one of the electrostatic pre-filters featured in the AB Series.

LTC-1P SSF - Liquid Tank Conditioner - single electrostatic filter, 140 CFM blower, one GML005 UV lamp
LTC-2P SSF - Liquid Tank Conditioner - single electrostatic filter, 140 CFM blower, two GML005 UV lamps
LTX10P SSF - Vent - single electrostatic filter (FLT025)

UFHO Fixtures top ^

The additional UFHO models shown below are non-moisture resistant and are recommended only for installations where there is no danger of moisture affecting the UV fixture.