UV PRODUCTS
|
 |
|
AAW5-Z22C Water Filtration and UV
Disinfection Systems |
Designed to effectively treat water
flows of up to 15gpm, the AAW5-Z22C rack-mounted UV systems provide
a 5-micron sediment pre-filter with a full-flow, high capacity
carbon filter to treat taste and odor. Installation of a UV system
has never been easier with an innovative design that allows for
feedwater to enter the filters from either the right or left side of
the unit. |
 |
UV Filtration System Specifications |
|
Liquid Sugar Disinfection UV Systems |
The liquid sugar UV systems are
specially designed to treat liquids in a thin film manner - with the
UV lamps spaced close together to optimize the disinfection process.
These UV systems are designed to disinfect up to 200GPM of opaque and
thick liquids, sucrose syrups with high osmotic pressure (brix
25-67), glucose, juices and other base materials. |
 |
Liquid Sugar UV
Systems Technical Specifications |
|
Viqua UV Pro30 NSF Standard 55 Class A
Ultraviolet System Special |
The UV Max
Pro30 germicidal ultraviolet water system is certified by NSF International
against NSF/ANSI Standard 55, Class A for disinfection performance.
Pro30 UV water system is certified to reliably disinfect water flows of
up to 30GPM at 75% UV transmittance.
|
 |
PRO30 NSF 55 Class A UV Special |
|
Explosion Proof UV Systems for Water
Disinfection |
Explosion proof water disinfection
systems for potentially explosive environments in the chemical,
pharmaceutical, petrochemical, and oil and gas industries.
The explosion-proof water units use Nitrogen Purge systems with Class
1, Division 2, Group A-D rating. |
 |
Explosion Proof UV Systems Technical
Specifications |
|
Viqua UV Max Pro NSF Standard 55 Class A
Certified UV Water Disinfection Systems |
The UV Max
Pro ultraviolet water systems (formerly Trojan UVMax Pro) are tested and certified by NSF International against NSF/ANSI Standard 55,
Class A for disinfection performance. The UVC water systems are certified to reliably disinfect water flow of 10GPM, 20GPM or 30GPM.
US EPA UVDGM validated Pro 50 Series is available for 50GPM and above.
|
 |
Viqua UV Max PRO NSF UV Water Systems |
|
SQ-PA UV Systems *** DISCONTINUED *** |
The SQ-PA ultraviolet disinfection systems can be used in various applications where
flexibility and pricing sensitivity are deciding factors. Water flow rates from
1 to 20GPM.
SQ-PA Series *** Discontinued ***
|
 |
Viqua D4 UV Systems - 12GPM Whole-House
UV Water System |
Viqua UV Max D4 UV Water System
|
 |
Note: NSF Standard 55 Class B Certified
UV Water Systems also available. |
|
Medium Pressure UV Systems |
The LightSpeed UV systems integrate
medium pressure ultraviolet light technology into an inline chamber.
The medium pressure UV lamps produce wavelengths ranging from 200 to
700 nanometers (nm).
These UV systems are designed for installations requiring a
small installation footprint, low head loss and the ability to
process high flow rates. For water disinfection and destructions of
chloramines applications. |
 |
Medium Pressure UV Systems |
|
Wastewater UV Disinfection Systems |
Germicidal UV systems are rapidly
becoming standard for wastewater disinfection in large municipal and
industrial applications. After the water is treated initially and all
particles are filtered out, it goes through the UV system which
inactivates all remaining pathogens prior to releasing it back in the
environment. |
 |
Wastewater UV Systems |
|
SB Residential UV Water Purifiers
(discontinued) |
The SB ultraviolet
(UV) water disinfection systems are capable of treating small to mid
size water flow projects designed for residential (whole house -
point-of-entry & drinking water point-of-use) and light commercial
applications. Water flow rates from 1GPM (Gallons Per Minute) to
50GPM. |
 |
SB UV Water Purifiers Technical
Specifications |
|
DLR Commercial UV Water Purifiers
(discontinued) |
The DLR ultraviolet
(UV) water purifiers are capable of treating small to mid size water flow
projects designed for commercial and residential (whole house -
point-of-entry & drinking water point-of-use) applications.
Water flow rates from 4 gallons per minute to 40 gallons per minute.
AQ37086 NLR
1845 WS replacement lamp for DLR-A2 (DLR 2A)
Buy Now |
 |
DLR UV Water Purifiers Technical Specifications |
|
GLI Commercial / Industrial UV Water Purifiers
(discontinued) |
The GLI ultraviolet (UV) water purifiers are
capable of treating small water flows as well as large management
projects with germicidal UV. The GLI UV Water Purifiers use XLR5 (XLR
5) and XLR10 (XLR 10) UV lamps and are
applicable for General Water Disinfection, Cooling Towers Water
Purification & Process Water. The ultraviolet
water disinfection shall result in over 99% microbial reduction
from inlet to outlet. The water flow range is from 12 gallon per
minute to 140 gallons per minute. |
 |
GLI UV Water Purifiers Technical Specifications |
|
CHI Industrial UV Water Purifiers
(discontinued) |
The CHI ultraviolet (UV) water purifiers are constructed to meet the
Industrial standards and requirements. The CHI UV Water Purifiers
use XLR5 (XLR 5) and XLR10 (XLR 10) UV lamps and
are applicable for medical uv water purification & pharmaceutical
industries e.g. hospital requiring exacting pure water standards for
clinical applications and pharmaceutical manufacturing. The water flow range is
from 12 gallons per minute to 280 gallons per minute. |
 |
CHI UV Water Purifiers Technical Specifications |
|
CHI-HF Industrial UV Water Purifiers
(discontinued) |
The CHI-HF industrial ultraviolet water purifiers are constructed to
disinfect large to very large industrial water flows with
germicidal UV. The CHI-HF UV Water Purifiers use XLR30 (XLR 30)
high output UV lamps and are applicable in
Aquaculture / Aquarium, Swimming Pools, Amusement Water Parks and
General Industrial UV water purification. The water flow range is from 375 gallons per minute to 2,500 (2,900 RO/DI water) gallons per minute. |
 |
CHI-HF UV Water Purifiers Technical Specifications |
|
Polyethylene UV Water Purifiers - AB-PE
(discontinued) |
The A/B Polyethylene (HDPE) UV Water
Purifiers are most suitable for UV disinfection of sea water and
other lightly corrosive media in Aquacultures, Aquariums, Fish
Farms and Thermal Springs water purification applications. The reactor chamber is made of a
non corrosive, high temperature stable Polyethylene. The water flow ranges from
47 gallons per minute to 1,023 gallons per minute. |
 |
AB-PE UV Water Purifiers Technical Specifications |
|
A Complete Line of UV Water and Liquid Sugar Disinfection Systems
|
American Air & Water’s offers the best UV water disinfection systems at the most affordable
prices, all backed by the best service and engineering support in the
industry. We are pleased to announce that American Air & Water is
offering UV water purifiers manufactured by Viqua, a Trojan UV Technologies
company as well as custom UV disinfection solutions.
The line of UV water disinfection systems manufactured by
WEDECO - an international company owned by ITT Industries and the largest supplier of ultraviolet water
disinfection systems in the world - was discontinued.
American Air & Water® is proud to
offer a complete line of US made UV water purifiers. Whether for a residence or an
industrial facility, American Air & Water® can deliver UV systems from 1
to 1,000GPM (gallons per minute) for any application at the best
price. See
UV water disinfection applications »
We have found that most of our residential customers require a UV
water purification system that can treat 1 to 20 gallons per minute
(GPM) water flow. Because of this, we have secured the best product
on the market, backed by the best service and warranty in the world.
The SQ-PA UV water purifiers are equipped with all the necessary features,
in an economical and highly effective water disinfection UV system.
We provide customized UV disinfection solutions for commercial and
industrial water disinfection applications as well as UV systems for
liquid sugar and syrup disinfection. The large UV water
disinfection systems offer a
wealth of critical standard features and convenient options.
For disinfection of sea water and other corrosive media most suitable
are the PVC UV Water Purifiers. The
reactor chamber is made of a high temperature stable
PVC ensuring durability and resistance of the UV water
purifiers to corrosive liquids.
The UV disinfection systems are used for various applications. Go to
UV water disinfection applications or select a specific UV disinfection application below:
|
|
Request
a personalized UV water purifier quote from American Air & Water
|